Getting Sava Fixed

A trans-Pacific 30 day passage does a lot to a sailboat. Our time in the yard in Tahiti isn’t over! While resolving the known issues, we’ve found more problems with our twenty two year old boat. From sails and rigging to appliances, we’re getting Sava fixed so we can return to the water.

The Reasons We Hauled Out

Sava had water coming in through the stuffing box due to a vibrating engine. So we had to replace the engine mount and stuffing box and realign the prop shaft. We also needed to dry out and rebuild the rudder. After two weeks, we’re making progress on these jobs.

The engine mount is rebuilt and working. The prop shaft was straightened and realigned and is now installed!

Propellor on sailboat Sava
The propellor is improved and reinstalled

The rudder is dried out, refilled with fresh epoxy, and fitted with new rudder shafts. We know everything fits properly and will be reinstalled next week.

rudder on Sava
The rudder was rebuilt, refilled, and coated.
Rudder shaft being fitted
Ensuring the rudder shaft fits!

Sava has one coat of bottom paint and is waiting until just before she is ready to splash for the final coats.

Continue reading “Getting Sava Fixed”

In The Yard in Tahiti

Sava is out of the water and in the yard in Tahiti. We’ve been having some issues the last few months and sailed to Tahiti a week ago to try to get stuff fixed. It’s taking longer than we thought but it’s okay because Sava’s getting better and we’re in paradise!

Sava in the yard in Tahiti
The ladder we have to climb to get onto Sava

Why We’re In The Yard in Tahiti

Initially, we hauled out to replace the stuffing box, which is where the prop shaft enters the boat. The stuffing box has been leaking seawater into the engine bilge whenever the prop moves, basically whenever the boat was moving. The leak began during our Pacific passage, and got worse the last couple months.

Continue reading “In The Yard in Tahiti”

Cruising in The Marquesas

The Marquesas are beautiful and fun to explore. Located in one of the most remote regions on earth, tourists are uncommon and supplies are thin. In contrast, the land and seascapes are stunning! Read about cruising in the Marquesas, with some tips for first-timers.

About The Marquesas

The Marquesas archipelago is in the northeasternmost part of French Polynesia. This location makes it a common first stop for sailors crossing the Pacific. Other than sailors, not a lot of tourists visit this part of the world. Which means a lot of unspoiled beauty and some difficulty accessing basic goods.

Map of French Polynesia
Marquesas in relation to French Polynesia from WorldAtlas

The Marquesas consists of six occupied islands and we have been to five. Mountainous and green, the land provides ample fruit for its residents and visitors. So much fruit that Marquesan citrus is exported to Tahiti and beyond. The hard part of cruising in the Marquesas is finding internet, fresh veggies, and propane, and if you can get that all in one anchorage with clear water, don’t ever leave!

Sailing in The Marquesas

Sailing between islands in The Marquesas is good in that distances usually allow for daytime trips from one island to another. Here’s an idea of distances between islands (obviously differs depending on departure and arrival bay), from northeast to southwest (our route):

Map of Marquesas, French Polynesia
Map of Marquesas islands
  • Nuku Hiva to Ua Pou: approximately 22nm
  • Ua Pou to Tahuata: approximately 60nm
  • Tahuata to Hiva Oa: around 20nm
  • Hiva Oa to Fatu Hiva: about 45nm
  • The island we didn’t visit – yet – is Ua Huka, 30 miles from Nuku Hiva, so would take 6 hours.

It’s nice to have the luxury of jumping between islands without overnight trips, and each island is unique and worth visiting! Sometimes we have to motor sail, or just motor, especially when travelling between Tahuata and Hiva Oa.

Our friend Matt filmed us arriving in Hiva Oa – it was upwind so no sail!

The Land

Continue reading “Cruising in The Marquesas”